Guide

Landfill tipping fee statistics by state: What dumping construction dirt costs

EREF's state averages, 15 public rate schedules and what one load of dirt costs.

Dump trucks with their beds raised.

Soil Connect by the numbers

34%

average savings on dirt & hauling costs

  • 2019matching sites that have dirt with sites that need it since
  • 24 hrsfastest payout for haulers moving dirt
  • Daysto several matches for excess dirt, per Pittman Partners
  • 3 in 1Marketplace, Reporting & Hauling in one place

Ready for your next import or export?

Get Started

TL;DR

Landfill tipping fees are the gate charge a landfill sets for the waste it takes in, per ton or per cubic yard. EREF's national average reached $63.48 per ton in 2025, up from $62.28 in 2024. Figures here are municipal solid waste unless a row says otherwise. Six of the 15 public schedules here give clean dirt, clean fill or cover dirt its own line, and the other nine list none on the page we read.

Key landfill tipping fees by the numbers

  • $63.48 per ton, national average MSW tipping fee, unweighted, from EREF's 2025 analysis as Waste Today reported it (Source: Waste Today, 2025)
  • $84.44 per ton, Northeast average in EREF's 2023 edition, the highest of its six regions that year (Source: EREF, 2023)
  • $45.15 per ton, Texas statewide average at MSW landfills, 148 facilities reporting (Source: TCEQ, 2024)
  • $0.00 per ton for clean dirt at the Washington County, UT and Red Bluff, CA landfills (Source: Washington County, Tehama County, 2026)

Dollars per ton, unweighted, 2022 to 2025

Table: National average MSW tipping fee by year

| Year | Dollars per ton, unweighted |

| 2022 | $58.47 |

| 2023 | $56.80 |

| 2024 | $62.28 |

| 2025 | $63.48 |

Source: EREF, Waste Advantage, Waste Today, 2022 to 2025

Tipping fee averages by state

EREF's 2025 map lists average municipal solid waste tipping fees by state, reprinted below with the 2024 figure beside each. These are MSW averages, not C&D or dirt rates, and seven states have no 2025 figure. The general definition is in the entry for a gate fee on Wikipedia: the charge levied on a given quantity of waste received at a waste processing facility.

Dollars per ton as EREF's map prints them. No 2025 figure for Connecticut (no landfills accepting MSW identified) or Delaware, Hawaii, Massachusetts, New Hampshire, Rhode Island and Vermont (not reported). Florida's 2025 entry duplicates Alabama's, so we leave it out.

Table: Average MSW tipping fee by state

| State | 2025 | 2024 |

| Alaska | $232.33 | $124.25 |

| Missouri | $173.65 | $136.65 |

| Maine | $113.00 | $110.91 |

| New Jersey | $91.03 | $79.12 |

| California | $87.50 | $83.76 |

| Maryland | $84.14 | $84.14 |

| Pennsylvania | $83.98 | $85.45 |

| Illinois | $81.88 | $93.07 |

| Wisconsin | $77.75 | $85.64 |

| New York | $76.88 | $83.67 |

| Wyoming | $72.60 | $85.95 |

| Minnesota | $72.20 | $77.39 |

| Michigan | $68.07 | $77.93 |

| Washington | $68.01 | $47.70 |

| South Carolina | $63.67 | $56.20 |

| Virginia | $63.25 | $63.72 |

| Oregon | $62.71 | $65.98 |

| Georgia | $62.04 | $55.76 |

| Kansas | $59.22 | $34.78 |

| West Virginia | $58.71 | $45.92 |

| Tennessee | $57.66 | $62.24 |

| North Dakota | $57.45 | $49.00 |

| Oklahoma | $56.54 | $46.48 |

| Arkansas | $55.08 | $52.50 |

| Idaho | $53.06 | $38.21 |

| South Dakota | $52.55 | $47.00 |

| Ohio | $52.28 | $61.80 |

| Iowa | $51.35 | $49.73 |

| Texas | $51.09 | $42.56 |

| Colorado | $50.18 | $52.58 |

| Nebraska | $49.64 | $34.34 |

| North Carolina | $49.36 | $39.71 |

| Indiana | $49.14 | $43.56 |

| Mississippi | $44.10 | $31.90 |

| New Mexico | $43.41 | $47.44 |

| Montana | $42.18 | $42.59 |

| Arizona | $41.85 | $50.10 |

| Kentucky | $40.34 | $50.11 |

| Louisiana | $39.96 | $39.39 |

| Utah | $39.61 | $35.30 |

| Alabama | $35.65 | $38.78 |

| Nevada | $30.23 | $61.14 |

| Florida | see note | $53.47 |

Source: EREF map 2025, EREF map 2024, EREF, EREF, 2024 to 2025

  • State per-ton landfill fees: $0.94 to $6.66 per ton in state fees on municipal waste in four states checked: $0.94 in Texas, collected as part of the tipping fee, $2.18 at Missouri sanitary landfills from October 1, 2026, $6.25 across three Pennsylvania fees, $6.66 at metropolitan Minnesota landfills. (Source: TCEQ, Missouri DNR, Pennsylvania DEP, Minnesota Statutes, 2026)

The 2025 map runs from $30.23 in Nevada to $232.33 in Alaska. It does not print how many landfills sit behind each figure, and some moved sharply from 2024 (Nevada from $61.14, Alaska from $124.25), so read one state's number as a rough guide. Texas's agency reports $45.15 per ton from 148 facilities in 2024, against $42.56 on EREF's 2024 map.

Landfill fees & landfill cost by region

In EREF's 2023 edition, the latest regional figures on its open pages, the Northeast averaged $84.44 per ton and the Southeast $43.18, almost twice as much for the same ton. The Northeast was the only region that rose that year, up $8.52. Waste Today reports the Southeast and South Central rose most in 2025, so treat this ranking as a snapshot.

Dollars per ton, 2023

Table: Average MSW tipping fee by EREF region

| Group | Dollars per ton |

| Northeast | $84.44 |

| Pacific | $62.28 |

| Midwest | $57.24 |

| Mountains/Plains | $49.86 |

| South Central | $45.25 |

| Southeast | $43.18 |

Source: EREF, 2023

Municipal solid waste vs C&D rates

Municipal solid waste and construction and demolition debris sit on separate lines on most schedules here, and the gap runs both ways:

  • Chautauqua County, NY: C&D $44 per ton against MSW $32, 37.5% more.
  • Washington County, UT: C&D $32 against MSW $37.15, so C&D is cheaper.
  • Wasatch Integrated, Thomas County, SWACO and Dougherty County price the two the same.

Never read an MSW average as a construction rate, or either one as a dirt price. Waste Advantage reported from EREF's 2024 edition that C&D fees are now neck and neck with MSW in many places.

Per ton unless the cell says per cy (cubic yard). n/a: no rate listed. Examples, not state averages.

Table: Posted rates at named public landfills & systems

| State: facility | MSW | C&D | Rates from |

| WA: King County regional system | $243.38 self-haul, $191.47 contract haulers | n/a | 2026 |

| CA: Tehama County/Red Bluff Landfill | $123.73 | $123.73 same line | Jul 2026 |

| GA: DeKalb County, Seminole Road Landfill | $100.00 | $99.80 | 2026 |

| MN: Crow Wing County Landfill | $71.64 compacted | $9.00 per cy | 2026 |

| ND: City of Bismarck Landfill | $67.00 | inert $50.00 | 2026 |

| KS: Thomas County Landfill | $54.00 in county | $54.00 | 2026 |

| UT: Wasatch Integrated, Davis County | $46.00 | $46.00 | Jan 2026 |

| GA: Dougherty County Landfill | $40.97 | $40.97 | Dec 2025 |

| OH: SWACO Franklin County Sanitary Landfill | $39.75 in district | $39.75 | as listed Nov 2026 |

| CO: Larimer County Landfill | $35.00 compacted + $3.87 surcharge | rubble $40.00 per cy | 2026 |

| FL: Putnam County Landfill | $38.00 commercial | $15.00 per cy, collection centers | FY2025-26 |

| UT: Washington County Landfill | $37.15 | $32.00 | 2026 |

| NY: Chautauqua County Landfill | $32.00 | $44.00 | 2026 |

| CO: Otero County Landfill | $30.00 in county | n/a | 2026 |

| NC: Nash County | n/a | $64.00 with state fee | Jul 2026 |

Source: Tehama County, Larimer County, Otero County, Putnam County, DeKalb County, Dougherty County, Thomas County, Crow Wing County, Nash County, City of Bismarck, Chautauqua County, SWACO, Washington County, Wasatch Integrated, King County, 2025 to 2026

  • C&D share of Texas landfill tons: 23% of the 41.3 million tons landfilled in Texas was construction or demolition waste, 9.57 million tons at 50 landfills. (Source: TCEQ, 2024)

Dump fees at private dirt dump sites

Our searches on November 6, 2026, not a census, turned up few dump fees at private dirt dump sites: two privately run sites with open clean fill rates. Eagle River Fill & Transfer in Alaska charges $7 per cubic yard of clean fill, $70 per 10-cubic-yard end dump load and $140 per 20-yard belly or side dump, no contaminated material accepted. South Side Landfill in Indianapolis lists clean fill at $13 per cubic yard for cash customers, before a fuel surcharge. The other rates below are public landfills, examples of a dirt disposal ticket. For the budget side, read dirt disposal costs explained.

Each schedule's own dirt line. Eagle River defines clean fill as uncontaminated gravel, no debris, and is open May to October.

Table: Posted clean dirt rates at named facilities

| Facility | Clean dirt | Contaminated soil | Rates from |

| Eagle River Fill & Transfer, AK (private) | clean fill $7.00 per cy, $70 per 10-cy load, uncompactable fill $35 per cy | not accepted | 2026 |

| South Side Landfill, IN (private) | $13.00 per cy, cash customers | not listed | undated |

| Larimer County Landfill, CO | $180 per end dump load | not listed | 2026 |

| Wasatch Integrated, UT | $20.00 per ton | not listed | Jan 2026 |

| Otero County Landfill, CO | $1.00 per cy | $50.00 per ton in county | 2026 |

| City of Bismarck Landfill, ND | no clean dirt line | $85.00 per ton, prior approval | 2026 |

| Washington County Landfill, UT | $0.00 per ton | not listed | 2026 |

| Tehama County/Red Bluff Landfill, CA | $0.00 per ton, testing at 5+ yards | not listed | Jul 2026 |

| Thomas County Landfill, KS | cover dirt, no charge | n/a | 2026 |

| Chautauqua County Landfill, NY | not listed | $30.00 per ton | 2026 |

| DeKalb County, GA | no clean dirt line | $99.80 per ton | 2026 |

Source: Eagle River Fill & Transfer, South Side Landfill, Larimer County, Otero County, Wasatch Integrated, Washington County, Tehama County, Thomas County, City of Bismarck, Chautauqua County, DeKalb County, 2026, South Side undated

  • Clean or not: Otero County takes clean dirt at $1 per cubic yard, contaminated soil at $50 per ton.
  • Local or not: Wasatch Integrated doubles clean fill to $40 per ton out of district.

A landfill is also not the only place for clean dirt. Soil Connect's Get Rid of Dirt service matches excess dirt with a nearby site that needs it, which Soil Connect says saves time and money.

Check the clean dirt line, and whether a nearby job site would take the load, before paying a dirt dump fee.

What dumping construction dirt costs per load

One load of construction dirt costs $0 to about $1,000 to tip at the facilities above, depending on which line of which schedule it lands on. The table is an illustration, not a quote: one 10-cubic-yard end dump load, Eagle River's basis and the low end of the 10 to 12 yards Soil Connect lists for a standard dump truck, at about 2,025 lb per cubic yard of dry soil, the approximate CIWMB factor LA County Public Works publishes. That is 20,250 lb, or 10.125 tons, times each per-ton rate. Per-load and per-yard prices are taken as posted.

10 cy x 2,025 lb = 20,250 lb = 10.125 tons. Wet soil is 2,106 lb per cy on the same table. Scale weight, minimums and surcharges change the real ticket.

Table: Illustration: one 10-cubic-yard load of dirt at posted rates

| Facility and line | Posted rate | Load cost |

| Washington County, UT: clean dirt | $0.00 per ton | $0.00 |

| Otero County, CO: clean dirt | $1.00 per cy | $10.00 |

| Eagle River, AK: clean fill, end dump | $70 per 10-cy load | $70.00 |

| Larimer County, CO: clean dirt, end dump | $180 per load | $180.00 |

| Wasatch Integrated, UT: clean fill | $20.00 per ton | $202.50 |

| Chautauqua County, NY: contaminated soil | $30.00 per ton | $303.75 |

| Eagle River, AK: uncompactable fill, end dump | $350 per 10-cy load | $350.00 |

| Chautauqua County, NY: no dirt line, at the C&D rate | $44.00 per ton | $445.50 |

| Otero County, CO: contaminated soil | $50.00 per ton | $506.25 |

| City of Bismarck, ND: contaminated soil & dirt | $85.00 per ton | $860.63 |

| DeKalb County, GA: contaminated soils | $99.80 per ton | $1,010.48 |

Source: Washington County, Otero County, Eagle River Fill & Transfer, Larimer County, Wasatch Integrated, Chautauqua County, City of Bismarck, DeKalb County, LA County Public Works, Soil Connect, 2026

  • Estimated vs actual dirt volumes: 24% to 30% difference between estimated dirt import and export volumes and the amount actually moved, per Soil Connect's data. (Source: Soil Connect, as listed Nov 2026)
  • Soil Connect savings on dirt: 28% to 42% what Soil Connect says its customers save on their dirt, per its Get Rid of Dirt page. (Source: Soil Connect, as listed Nov 2026)

The load count matters as much as the rate. Soil Connect's data shows a 24% to 30% difference between estimated dirt import and export volumes and the amount actually moved, so a budget built on the estimate can be off by that share of its loads. At a contaminated soil or C&D rate, one truck here runs about $300 to $1,000, and a C and D landfill may want paperwork first: Eagle River requires prior approval and certification forms for C&D loads.

That is the cost a dirt exchange goes after: one contractor pays to dump while another nearby pays to import, and matching the two jobs is how a dirt exchange saves money. Soil Connect runs that match through the Get Rid of Dirt service, where it reports customers saving 28% to 42% on their dirt, and some contractors go further by monetizing surplus soil on-site. Post the load, create an RFQ or contact Soil Connect before booking the landfill run.

Price the load three ways: the landfill's dirt line, its C&D line, and a nearby site that needs fill.

Methodology & sources

  • Every figure was read from the linked page on November 6, 2026 and carries the year or effective date that page gives. Load costs are our math, shown in the table.
  • State averages are from EREF's public 2024 and 2025 maps. The $63.48 and $62.28 national figures are as Waste Today and Waste Advantage reported them, since EREF's open pages print no dollar figure. Regional averages are from EREF's 2023 summary.
  • The named schedule table is 15 public rate schedules in 12 states: examples, not state averages. MSW and C&D stay in separate columns in each schedule's own unit.
  • The per-load illustration multiplies each posted per-ton rate by 10.125 tons. It is not a quote and not a Soil Connect price. Soil Connect figures are the company's own claims.
  • Not covered: private dirt dump rates beyond the two open sheets we found, King County's dirt and C&D rates, and schedules that blocked our request (Pierce County WA, York County SC, Onslow County NC and others).

All sources, checked November 6, 2026

  1. EREF, Analysis of MSW Landfill Tipping Fees, 2023 summary
  2. EREF, 2024 Analysis of MSW Landfill Tipping Fees, report page
  3. Waste Advantage Magazine, July 24, 2025, on EREF's 2024 analysis
  4. TCEQ, Municipal Solid Waste in Texas, 2024 data (AS-187/25)
  5. Tehama County/Red Bluff Landfill, CA, fees from July 1, 2026
  6. Larimer County Landfill, CO, 2026 fee schedule
  7. Otero County Landfill, CO, 2026 fees
  8. Putnam County Landfill, FL, FY 2025-26 rates
  9. DeKalb County Seminole Road Landfill, GA, 2026 fees
  10. Dougherty County Landfill, GA, fees from December 2, 2025
  11. Thomas County Landfill, KS, 2026 fees
  12. Crow Wing County Landfill, MN, fees from January 1, 2026
  13. Nash County, NC, FY 27 fee schedule
  14. City of Bismarck Landfill, ND, 2026 fee schedule
  15. Chautauqua County Landfill, NY, 2026 pricing schedule
  16. SWACO, Franklin County Sanitary Landfill, OH, rates page
  17. Washington County Solid Waste District, UT, 2026 fees
  18. Wasatch Integrated Waste Management District, UT, January 2026 rates
  19. King County Solid Waste Division, WA, 2026 rates bulletin
  20. Eagle River Fill & Transfer, AK (private), 2026 price sheet
  21. LA County Public Works, CIWMB volume to weight factors
  22. Pennsylvania DEP, municipal waste management fees
  23. 2026 Minnesota Statutes, section 473.843
  24. Missouri DNR, tonnage fee news release, August 5, 2026
  25. Soil Connect, Get Rid of Dirt page
  26. Soil Connect, Dirt Reports page
  27. Soil Connect blog, How Many Cubic Yards Are Really In A Truck?
  28. Waste Today, July 27, 2026, on EREF's 2025 analysis
  29. EREF Tip Fee Report 2025, interactive state map
  30. EREF Tip Fee Report 2024, interactive state map
  31. EREF, 2025 Analysis of MSW Landfill Tipping Fees, report page
  32. South Side Landfill, Indianapolis, IN (private), rates page
Key stats By state Private dirt sites Cost per load Sources

Tipping fees FAQ

Frequently asked questions

Why are tipping fees so different by state?

EREF's 2024 analysis names landfill scale, public or private ownership, and waste-to-energy infrastructure as influences on tipping fees. Waste Advantage reported from that edition that private landfills charge about 34% more, waste-to-energy states 28% more, and that fees track labor and maintenance costs.

State per-ton fees differ too: $6.25 in Pennsylvania, $6.66 at metropolitan Minnesota landfills, $2.18 in Missouri from October 2026, $0.94 in Texas.

Is clean dirt charged a tipping fee?

Sometimes. Each landfill sets its own clean dirt line, and many schedules list none. Washington County, Utah and the Red Bluff landfill in Tehama County, California list clean dirt at $0.00 per ton in 2026, with Red Bluff requiring county testing at five or more yards. Otero County, Colorado charges $1 per cubic yard, Wasatch Integrated $20 per ton and Larimer County $180 per end dump load.

How much does it cost to dump a truckload of dirt?

In the illustration above, one 10-cubic-yard load of dry soil weighs about 10.125 tons and costs $0 at Washington County, Utah's clean dirt line, $10 at Otero County's $1 per yard line, $70 at Eagle River's flat end dump price, $202.50 at Wasatch Integrated's $20 per ton clean fill rate and $445.50 at Chautauqua County's C&D rate. Contaminated soil reaches $1,010.48 at DeKalb County's rate. Scale weight, minimums and surcharges change the ticket. A nearby site that needs the fill is not a landfill, so no landfill tipping fee applies. Hauling still does.

Dirt disposal & hauling cost guides

Keep reading

View all posts

The Nation's Largest Dirt Marketplace

Create an RFQ or Post and learn how much dirt near you actually costs.

Get Started

Landfill tipping fee statistics by state: What dumping construction dirt costs

Landfill tipping fee statistics by state: What dumping construction dirt costs
November 17, 2026

Explore Other

Blog Posts

Brownfield statistics: Contaminated construction site dirt by the numbers
Brownfield statistics: Contaminated construction site dirt by the numbers

EPA still works from a 450,000 to 1 million brownfield estimate. Here are the measured counts, grant dollars and public disposal rates.

Read more
Dirt & aggregate statistics: Sand, gravel & crushed stone production by state
Dirt & aggregate statistics: Sand, gravel & crushed stone production by state

Texas leads the country in crushed stone and in sand & gravel. Here is each state's published 2025 output, plus what a ton costs at the pit.

Read more
Construction & demolition waste statistics: Where construction site dirt ends up
Construction & demolition waste statistics: Where construction site dirt ends up

EPA counted 600 million tons of C&D debris in 2018 across seven materials, none of them soil. What it covers, what it skips, what Soil Connect sees.

Read more
Landfill tipping fee statistics by state: What dumping construction dirt costs
Landfill tipping fee statistics by state: What dumping construction dirt costs

EREF's state averages, 15 public rate schedules and what one load of dirt costs.

Read more
Road base vs gravel: What belongs under driveways, pads & roads
Road base vs gravel: What belongs under driveways, pads & roads

Road base goes under anything that carries wheels, because its fines compact into a hard layer. Clean gravel goes where water has to move.

Read more
Engineered fill vs structural fill: How the specs differ
Engineered fill vs structural fill: How the specs differ

Structural fill names the job: carrying a load. Engineered fill names the method: placed in lifts and tested to a geotech's spec. Fill under a footing usually has to be both.

Read more
How to get dump truck contracts as an owner-operator
How to get dump truck contracts as an owner-operator

Get legal and insured first, then get on contractor and DOT plan holder lists, join dirt marketplaces and bill with digital tickets so contractors pay faster.

Read more
Soil classification guide: USCS & AASHTO explained for builders
Soil classification guide: USCS & AASHTO explained for builders

Two lab tests, a sieve analysis and the Atterberg limits, turn a bag of dirt into a symbol like CL or A-6. Here is how to read both systems.

Read more
Soil stabilization guide: Lime, cement & mechanical methods
Soil stabilization guide: Lime, cement & mechanical methods

Lime fixes plastic clay, cement binds sandy soil, and geosynthetics carry aggregate over soft subgrade. Soil tests pick the method, and the mix design sets the dose.

Read more
Construction aggregates guide: Types, sizes & how to order
Construction aggregates guide: Types, sizes & how to order

Order aggregate by its spec number and gradation, not by a yard name. Source, size and haul distance set what arrives and what it costs.

Read more
Soil Connect vs Hello Gravel: Sourcing fill & aggregate for job sites
Soil Connect vs Hello Gravel: Sourcing fill & aggregate for job sites

Hello Gravel sells bulk stone online at a posted delivered price. Soil Connect matches fill and aggregate between nearby job sites.

Read more
Soil Connect vs DirtMatch: Which dirt marketplace fits contractors?
Soil Connect vs DirtMatch: Which dirt marketplace fits contractors?

DirtMatch fits small jobs and pros who work their own matches. Soil Connect fits contractors who want trucks booked and loads logged.

Read more
Soil Connect vs Aggregate Markets: Bulk material ordering compared
Soil Connect vs Aggregate Markets: Bulk material ordering compared

Aggregate Markets sells priced quarry stone and soil. Soil Connect matches dirt imports and exports between job sites.

Read more
Soil Connect vs HaulHub: eTicketing for dirt haulers compared
Soil Connect vs HaulHub: eTicketing for dirt haulers compared

HaulHub handles DOT and plant tickets on public roadwork. Soil Connect ties etickets to a dirt marketplace and fast hauler pay.

Read more
Crushed stone vs gravel: Which base material to order
Crushed stone vs gravel: Which base material to order

Crushed stone is the base to order when a layer carries trucks. Gravel suits drainage and finish work, because its rounded stone rolls under load.

Read more
How to convert tons to cubic yards for dirt, sand & gravel
How to convert tons to cubic yards for dirt, sand & gravel

Divide the tons by the material's weight per cubic yard. Dry 1/4 to 2 inch gravel runs about 1.43 tons a loose yard and wet about 1.7, so moisture moves the answer.

Read more
How to dispose of contaminated soil from a job site
How to dispose of contaminated soil from a job site

Test the soil, classify it under RCRA, then haul it on the right paperwork to a permitted facility. Your state agency and consultant set the details.

Read more
Borrow pit guide: How contractors source & permit borrow material
Borrow pit guide: How contractors source & permit borrow material

A borrow pit supplies raw soil for fill. Permits, reclamation and haul distance set its real cost.

Read more
Fill dirt vs topsoil: Which one your project actually needs
Fill dirt vs topsoil: Which one your project actually needs

Fill dirt builds grade and carries load. Topsoil grows grass. Many sites need both: compacted fill below, at least 4 inches of topsoil wherever grass will grow.

Read more
How to compact fill dirt so it does not settle
How to compact fill dirt so it does not settle

Fill settles least when it goes down in thin lifts near optimum moisture, gets the right compactor and passes a density test before the next lift.

Read more
How Contractors Are Monetizing Excess Dirt On-Site
How Contractors Are Monetizing Excess Dirt On-Site

Contractors are turning excess dirt into revenue by matching local supply with demand, reducing disposal costs and improving project margins.

Read more
Understanding Fill Quality: When Cheap Dirt Gets Expensive
Understanding Fill Quality: When Cheap Dirt Gets Expensive

Fill quality directly impacts compaction, inspections, and long-term performance — and low-cost fill can quickly become expensive if quality is overlooked.

Read more
How Jobsite Dirt Matching Reduces Risk, Not Just Cost
How Jobsite Dirt Matching Reduces Risk, Not Just Cost

Jobsite dirt matching reduces schedule risk, supply disruption, and rework while improving cost control and material visibility.

Read more
Why Efficiency Is the Key to Winning More Profitable Jobs
Why Efficiency Is the Key to Winning More Profitable Jobs

Efficiency across sourcing, hauling, and logistics helps contractors reduce cost, improve schedule reliability, and win more profitable jobs.

Read more
The Biggest Hidden Cost Drivers in Earthwork Projects Today
The Biggest Hidden Cost Drivers in Earthwork Projects Today

Hidden cost drivers like haul distance, idle time, and poor supply visibility quietly erode earthwork project margins.

Read more
How Smarter Material Sourcing Helps Contractors Protect Profit
How Smarter Material Sourcing Helps Contractors Protect Profit

Smarter material sourcing improves visibility, reduces haul distance, and helps contractors protect profit across every phase of a project.

Read more
Cost Control in Sitework: The New Competitive Advantage
Cost Control in Sitework: The New Competitive Advantage

Cost control in sitework now depends on visibility, logistics efficiency, and local material connections — not just price per yard.

Read more
Where Construction Margins Are Disappearing — And How to Protect Them
Where Construction Margins Are Disappearing — And How to Protect Them

Contractors are losing margins through small sourcing, hauling, and scheduling inefficiencies. Smarter material visibility and local sourcing help protect profit.

Read more
Why Shorter Hauls Matter More Than Ever in 2026
Why Shorter Hauls Matter More Than Ever in 2026

Shorter hauls reduce fuel risk, improve labor efficiency, and help contractors maintain reliable schedules in today’s tighter construction environment.

Read more
What Contractors Get Wrong About Fill Pricing
What Contractors Get Wrong About Fill Pricing

Fill pricing mistakes often come from overlooking material type, haul distance, availability, and schedule risk. Contractors who understand the full cost of sourcing fill can reduce delays, control budgets, and protect margins.

Read more
Local Dirt vs Long Hauls: Where Projects Really Lose Money
Local Dirt vs Long Hauls: Where Projects Really Lose Money

By sourcing material closer to the jobsite and improving visibility into local supply, contractors can reduce risk, control schedules, and protect margins.

Read more
Clean Fill Pricing Explained: Do You Know What You’re Paying?
Clean Fill Pricing Explained: Do You Know What You’re Paying?

Clean fill pricing varies more than most contractors realize, driven by distance, demand, and material requirements.

Read more
Material Specs That Matter: What Every Contractor Should Know Before Ordering Fill
Material Specs That Matter: What Every Contractor Should Know Before Ordering Fill

Understanding fill material specs helps contractors avoid rework, reduce delays, and control project costs before trucks ever arrive.

Read more
Hidden Costs of Hauling: How Distance Eats Into Your Project Budget
Hidden Costs of Hauling: How Distance Eats Into Your Project Budget

Digital marketplaces like Soil Connect are reducing hauling distance, cutting hidden costs, and helping contractors keep projects on schedule.

Read more
Seasonal Dirt Costs: How Weather and Demand Affect Your Bottom Line
Seasonal Dirt Costs: How Weather and Demand Affect Your Bottom Line

Weather and demand drive seasonal dirt pricing, and contractors using digital tools are better positioned to control costs year-round.

Read more
The Dirt Exchange Economy: How Matching Supply and Demand Saves Millions
The Dirt Exchange Economy: How Matching Supply and Demand Saves Millions

Digital marketplaces like Soil Connect are reducing waste, cutting costs, and helping contractors match surplus dirt to demand faster.

Read more
Smart Hauling Strategies: Reducing Idle Time and Maximizing Every Load
Smart Hauling Strategies: Reducing Idle Time and Maximizing Every Load

Digital platforms help contractors reduce hauling delays, maximize loads, and keep projects moving efficiently.

Read more
Cubic Yard Confusion: Why Truck Capacity Isn’t Always What It Seems
Cubic Yard Confusion: Why Truck Capacity Isn’t Always What It Seems

Contractors are reducing surprises and cutting hauling costs by understanding how real truck capacity differs from advertised cubic yards.

Read more
Jobsite to Jobsite: Why Local Dirt Matches Are the Future of Construction Savings
Jobsite to Jobsite: Why Local Dirt Matches Are the Future of Construction Savings

Local dirt matches are helping contractors cut hauling costs, speed up sourcing, and keep projects running efficiently.

Read more
The True Cost of Delays: How Faster Dirt Matches Keep Projects on Schedule
The True Cost of Delays: How Faster Dirt Matches Keep Projects on Schedule

Digital marketplaces like Soil Connect help contractors avoid delays by matching dirt and haulers faster, cutting costs and keeping projects on schedule.

Read more
The Dirt Exchange Economy: How Matching Supply and Demand Saves Millions
The Dirt Exchange Economy: How Matching Supply and Demand Saves Millions

Digital marketplaces like Soil Connect are streamlining sourcing, cutting costs, and connecting contractors faster.

Read more
How Transparent Pricing Transforms Contractor Relationships
How Transparent Pricing Transforms Contractor Relationships

Digital marketplaces like Soil Connect are streamlining sourcing, cutting costs, and connecting contractors faster.

Read more
Beyond the Dirt: Why Digital Marketplaces Are Changing the Construction Game
Beyond the Dirt: Why Digital Marketplaces Are Changing the Construction Game

Digital marketplaces like Soil Connect are streamlining sourcing, cutting costs, and connecting contractors faster.

Read more
Hauling Efficiency 101: Tips to Reduce Empty Loads and Wasted Trips
Hauling Efficiency 101: Tips to Reduce Empty Loads and Wasted Trips

Every mile and load matters. Learn how smarter route planning and digital tools are helping contractors reduce empty trips and boost hauling efficiency.

Read more
Quarry vs. Marketplace: Which Source Delivers Better Value for Fill?
Quarry vs. Marketplace: Which Source Delivers Better Value for Fill?

Quarries offer reliability — but digital marketplaces deliver flexibility, speed, and savings. Learn how contractors are getting more value from every load.

Read more
Cutting Out the Middleman: How Contractors Can Take Control of Dirt Costs
Cutting Out the Middleman: How Contractors Can Take Control of Dirt Costs

Contractors are saving time and money by cutting out the middleman. Learn how direct digital connections help you control costs and streamline operations.

Read more
From Surplus to Savings: Turning Your Excess Dirt Into Revenue
From Surplus to Savings: Turning Your Excess Dirt Into Revenue

This blog explains how contractors are saving money and earning revenue by matching surplus material with local demand through digital marketplaces like Soil Connect.

Read more
Dirt Disposal Costs: The Hidden Budget Drain on Construction Projects
Dirt Disposal Costs: The Hidden Budget Drain on Construction Projects

This blog breaks down why disposal is so expensive — and how digital tools like Soil Connect help contractors save by connecting surplus dirt with nearby demand.

Read more
What Is the Market Rate for Common Fill: Do You Know What You’re Paying?
What Is the Market Rate for Common Fill: Do You Know What You’re Paying?

Common fill is one of the most widely used materials in construction — but are you paying a fair rate? Prices vary widely depending on supply, hauling, and middlemen markups.

Read more
The Dirt Exchange Economy: How Matching Supply and Demand Saves Millions
The Dirt Exchange Economy: How Matching Supply and Demand Saves Millions

In construction, dirt is money — and the old model of buying fill and dumping excess is costing contractors more than they realize. The dirt exchange economy changes that by connecting jobsites with complementary needs, reducing waste, hauling costs, and delays. Learn how this smarter model is already saving millions across the industry.

Read more
From Quarry to Jobsite: Tracing the Real Journey of Construction Materials
From Quarry to Jobsite: Tracing the Real Journey of Construction Materials

In this post, we trace the full lifecycle of construction materials, from sourcing and processing to hauling, delivery, and backhauling. Learn how understanding this journey helps contractors cut costs, avoid downtime, and optimize every project.

Read more
Seasonal Dirt Costs: How Weather and Demand Affect Your Bottom Line
Seasonal Dirt Costs: How Weather and Demand Affect Your Bottom Line

How rain, snow, heat, and demand cycles impact dirt pricing — and strategies contractors can use to plan ahead, reduce costs, and protect their margins.

Read more
Quarry Dirt vs. Jobsite Dirt: What Contractors Need to Know
Quarry Dirt vs. Jobsite Dirt: What Contractors Need to Know

Most contractors find the best results using a smart mix of dirt. Knowing when to choose which type can save thousands.

Read more
How Much Money Can You Really Save by Matching to Dirt from Another Jobsite?
How Much Money Can You Really Save by Matching to Dirt from Another Jobsite?

Dirt costs are one of the most overlooked expenses in construction. Here’s how smarter dirt management can put thousands back in your pocket.

Read more
How Many Cubic Yards Are Really In A Truck?
How Many Cubic Yards Are Really In A Truck?

See how weight limits, material density, and truck type affect how many cubic yards you can really haul in one trip.

Read more
Geotech Reports Decoded: What Material Specs Mean for Your Bottom Line
Geotech Reports Decoded: What Material Specs Mean for Your Bottom Line

Geotechnical reports may look technical, but the material specs inside them shape everything from sourcing to profit margins.

Read more
Screened vs Unscreened Fill Dirt: Which Should You Use?
Screened vs Unscreened Fill Dirt: Which Should You Use?

Read more
Structural Fill Dirt: Key Benefits for Your Build
Structural Fill Dirt: Key Benefits for Your Build

Read more
The Future of Dirt Brokering: Tech-Driven Solutions for a Manual Industry
The Future of Dirt Brokering: Tech-Driven Solutions for a Manual Industry

Dirt brokering is evolving. Digital tools like Soil Connect’s Marketplace are streamlining material sourcing, reducing costs, and eliminating manual headaches—making life easier for contractors, haulers, and suppliers alike.

Read more
Dirt and Aggregate: Selecting the Ideal Material Mix
Dirt and Aggregate: Selecting the Ideal Material Mix

Read more
Engineered Fill Dirt: Custom Solutions for Stable Construction
Engineered Fill Dirt: Custom Solutions for Stable Construction

Read more
Dirt Hauling Contracts and Agreements: Navigating Risk
Dirt Hauling Contracts and Agreements: Navigating Risk

Read more
How to Evaluate Local Soil Suppliers for Your Next Project
How to Evaluate Local Soil Suppliers for Your Next Project

Read more
A Contractor’s Guide to Ordering Bulk Clean Fill Dirt
A Contractor’s Guide to Ordering Bulk Clean Fill Dirt

Understanding the distinction between clean fill dirt and regular soil is critical when planning any site development.

Read more
5 Key Benefits of Using Clean Fill Dirt for Your Project
5 Key Benefits of Using Clean Fill Dirt for Your Project

Clean fill dirt is often an overlooked hero in construction and landscaping, providing a reliable, contaminant-free foundation for projects of all sizes.

Read more
National Dirt Trends: What We’re Seeing in Pricing and Availability in 2025
National Dirt Trends: What We’re Seeing in Pricing and Availability in 2025

Fill dirt prices and availability are shifting in 2025. This post covers key regional trends, rising hauling challenges, and how contractors can stay ahead.

Read more
Digital Load Tracking: Why It’s a Game Changer for Construction Projects
Digital Load Tracking: Why It’s a Game Changer for Construction Projects

Digital load tracking transforms the process by providing real-time visibility, eliminating paper tickets, and streamlining reporting and invoicing — helping contractors save time, cut costs, and stay competitive.

Read more
Bidding Smarter: How to Win More Earthwork Jobs with Soil Connect
Bidding Smarter: How to Win More Earthwork Jobs with Soil Connect

Winning earthwork jobs in today’s market isn’t just about offering the lowest price — it’s about bidding smarter. Learn how Soil Connect helps contractors tighten up material sourcing, secure better hauling rates, and track every load in real time, so you can build competitive, profitable bids and win more work.

Read more
How to Save Thousands on Your Next Dirt Import or Export Project
How to Save Thousands on Your Next Dirt Import or Export Project

Learn proven ways to cut costs on dirt import and export jobs, from smarter hauling strategies to listing best practices.

Read more
What Makes a Dirt Listing Stand Out? Tips from Our Marketplace Experts
What Makes a Dirt Listing Stand Out? Tips from Our Marketplace Experts

Our experts share tips on setting competitive prices, writing clear descriptions, and including key pickup details to attract more responses and get your material off-site quicker.

Read more
Comparing Flat-Rate vs. Hourly Dirt Hauling Services
Comparing Flat-Rate vs. Hourly Dirt Hauling Services

Choosing the right hauling cost structure can make or break your project's budget.

Read more
Negotiating Bulk Soil Purchases to Save on Material Costs
Negotiating Bulk Soil Purchases to Save on Material Costs

Sourcing large quantities of soil may seem like a basic task, but the strategy behind it can greatly affect your project’s bottom line.

Read more
How Shorter Trucking Distances Lower Your Project’s Environmental Footprint
How Shorter Trucking Distances Lower Your Project’s Environmental Footprint

How reducing trucking distances cuts emissions, saves fuel, and keeps your projects on schedule.

Read more
How Can You Tell What You Are Actually Spending On Dirt?
How Can You Tell What You Are Actually Spending On Dirt?

Uncover the hidden costs of dirt and aggregate in your construction projects and learn how to manage your budget more effectively.

Read more
Clean Fill Dirt: Why It’s Essential for Landscaping Projects
Clean Fill Dirt: Why It’s Essential for Landscaping Projects

Before planting flowers, laying turf, or pouring concrete, it's essential to establish a solid foundation for your outdoor project.

Read more
How to Determine the Best Select Fill Dirt for Residential Construction
How to Determine the Best Select Fill Dirt for Residential Construction

When planning any landscaping or construction project, the type of soil you use is the backbone of your results.

Read more
Dirt Hauling: Tips for Coordinating Pickup, Delivery, and Disposal
Dirt Hauling: Tips for Coordinating Pickup, Delivery, and Disposal

Whether it’s digging foundations, leveling land, or cleaning up after demolition, dirt hauling services play a central role in keeping the job running smoothly.

Read more
Top Types of Fill Dirt and Their Construction Applications
Top Types of Fill Dirt and Their Construction Applications

Choosing the right type of fill dirt is one of the most important decisions in any construction project.

Read more
Find Dirt Online: What to Know Before You Buy or Sell Soil
Find Dirt Online: What to Know Before You Buy or Sell Soil

In the past, finding quality soil meant relying on local suppliers, hoping they had the right type in stock, and arranging transportation yourself.

Read more
What Is a Dirt Marketplace and Why You Should Be Using One
What Is a Dirt Marketplace and Why You Should Be Using One

Moving large amounts of dirt used to require a chain of phone calls, paper forms, and repeated coordination. Digital platforms are transforming how soil is bought, sold, and transported.

Read more
Top 5 Things to Know Before Hauling Clean Fill Across State Lines
Top 5 Things to Know Before Hauling Clean Fill Across State Lines

Key tips for hauling clean fill across state lines and staying compliant with ease.

Read more
Maximizing Efficiency in Construction: The Role of Digital Tools
Maximizing Efficiency in Construction: The Role of Digital Tools

Discover how digital tools boost jobsite efficiency, streamline hauling, and improve project tracking.

Read more
The Benefits of Diversifying Your Dirt Offerings: Sand, Gravel, and Beyond
The Benefits of Diversifying Your Dirt Offerings: Sand, Gravel, and Beyond

Choosing the right material for each job is a crucial part of ensuring that projects stay on schedule and meet their objectives.

Read more
The Advantages of Using Select Fill Dirt in Foundation Preparation
The Advantages of Using Select Fill Dirt in Foundation Preparation

In construction projects, the materials used beneath the surface are just as important as those placed above it. One of the most vital materials is select fill dirt, a specific type of soil chosen for its stability and consistency.

Read more
Select Fill Dirt Vs Common Fill: What’s The Difference?
Select Fill Dirt Vs Common Fill: What’s The Difference?

Fill dirt is a crucial material used in many construction projects, and understanding its basic nature is essential for every project owner.

Read more
How Dirt And Aggregate Impact Construction Site Stability
How Dirt And Aggregate Impact Construction Site Stability

In construction projects, the proper use of dirt and aggregate plays an essential role in ensuring the stability of the site and the longevity of the structures built on it.

Read more
Key Benefits of Using Digital Dirt Marketplaces for Sourcing Soil
Key Benefits of Using Digital Dirt Marketplaces for Sourcing Soil

Traditionally, sourcing soil for construction and landscaping projects has been a laborious process, involving multiple phone calls, site visits, and negotiations.

Read more
Understanding Plasticity Index: What It Means for Soil Performance
Understanding Plasticity Index: What It Means for Soil Performance

Understanding the Plasticity Index (PI) of soil is crucial in fields like construction and engineering.

Read more
The Atterberg Limits Explained: LL, PL, and PI
The Atterberg Limits Explained: LL, PL, and PI

Understanding the Atterberg limits is crucial in the construction industry because these limits help determine the suitability of soil for various construction projects

Read more
Plasticity Index and Soil Type: A Guide for Builders
Plasticity Index and Soil Type: A Guide for Builders

Understanding soil plasticity is crucial for any construction project because it directly affects the soil's ability to change shape without cracking or losing strength under pressure.

Read more
Soil Stabilization: Reducing Plasticity Index with Industrial Waste
Soil Stabilization: Reducing Plasticity Index with Industrial Waste

Soil stabilization is a critical engineering practice aimed at enhancing soil strength and durability to support construction projects.

Read more
Screened vs. Unscreened Fill Dirt: Pros and Cons
Screened vs. Unscreened Fill Dirt: Pros and Cons

The quality of fill dirt significantly affects construction projects' structural integrity and longevity.

Read more
Comparing Fill Dirt Types for Safe Septic System Installation
Comparing Fill Dirt Types for Safe Septic System Installation

Understanding the fill dirt for the septic system is crucial for successful installation.

Read more
Building Foundations with Clay Fill Dirt: What You Need to Know
Building Foundations with Clay Fill Dirt: What You Need to Know

The stability of any building depends significantly on the type of soil on which it is constructed.

Read more
Dirt Marketplaces: How They Are a Game-Changer for Small Contractors
Dirt Marketplaces: How They Are a Game-Changer for Small Contractors

In the fast-evolving construction sector, digital platforms for dirt trading have emerged as transformative tools, particularly for small contractors.

Read more
How to Build a Reliable Network of Dirt Suppliers and Buyers
How to Build a Reliable Network of Dirt Suppliers and Buyers

In the world of construction, the availability and quality of materials can dictate the pace and success of projects. A reliable dirt supplier network is essential because it ensures that high-quality soil is available when needed, preventing delays and reducing costs. Managing a dependable supply chain allows for better project planning. It also positions businesses to respond quickly to market demands, a crucial factor in maintaining competitiveness in the construction industry.

Read more
Exploring the Growing Demand for Gravel in the Construction Industry
Exploring the Growing Demand for Gravel in the Construction Industry

Gravel is a fundamental component widely utilized across various construction sectors.

Read more
How to Plan Your Dirt Hauling for Maximum Efficiency
How to Plan Your Dirt Hauling for Maximum Efficiency

Efficient dirt hauling is crucial for any construction or landscaping project, impacting timelines and budgets.

Read more
The Essential Types of Dirt and Their Uses in Construction
The Essential Types of Dirt and Their Uses in Construction

Selecting the appropriate type of dirt for construction projects is critical due to its fundamental role in the structures' stability and durability.

Read more
How to Start a Profitable Dirt Brokerage Business: A Step-by-Step Guide
How to Start a Profitable Dirt Brokerage Business: A Step-by-Step Guide

Dirt brokering involves the buying and selling of large quantities of soil commonly used in construction, landscaping, and agricultural sectors.

Read more